LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Intake Manifold Disassemble

Intake Manifold Disassemble

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intake manifold mount (2).
    Fig 1: Intake Manifold Mount
    GM4248418Courtesy of GENERAL MOTORS COMPANY
  2. Intake Manifold Cover Bolt (1, 3) - Remove [3x]
  3. Remove the intake manifold lower cover (4).
  4. Intake Manifold Cover Bolt (1, 2) - Remove [5x]
    Fig 2: Intake Manifold Cover Bolt
    GM4248419Courtesy of GENERAL MOTORS COMPANY
  5. Remove the intake manifold upper cover (3).
  6. Manifold Absolute Pressure Sensor Bolt (4) - Remove
    Fig 3: Manifold Absolute Pressure Sensor Bolt
    GM4248424Courtesy of GENERAL MOTORS COMPANY
  7. Manifold Absolute Pressure Sensor (5) @ Intake Manifold (1) - Remove
  8. Evaporative Emission Canister Purge Solenoid Valve Bolt (3) - Remove
  9. Evaporative Emission Canister Purge Solenoid Valve (2) @ Intake Manifold - Remove
scientia non olet · About LEMON Manuals