LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Exhaust Gas Recirculation Cooler Removal

Exhaust Gas Recirculation Cooler Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the exhaust gas recirculation cooler temperature sensor bracket bolt (3).
    Fig 1: Exhaust Gas Recirculation Cooler Bolt
    GM4248344Courtesy of GENERAL MOTORS COMPANY
  2. Remove the exhaust gas recirculation cooler temperature sensor bracket (1).
  3. Exhaust Gas Recirculation Cooler Bolt (2) - Remove [2x]
  4. Exhaust Gas Recirculation Valve Bolt (3) - Remove [3x]
    Fig 2: Exhaust Gas Recirculation Valve Bolt
    GM4248345Courtesy of GENERAL MOTORS COMPANY
  5. Exhaust Gas Recirculation Cooler (2) - Remove
  6. Exhaust Gas Recirculation Cooler Gasket (1) - Remove and DISCARD
scientia non olet · About LEMON Manuals