LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Engine Oil Cooler Installation

Engine Oil Cooler Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a NEW engine oil cooler seal (1).
    Fig 1: Engine Oil Cooler
    GM2911662Courtesy of GENERAL MOTORS COMPANY
  2. Install the engine oil cooler (3).
  3. Install the 4 engine oil cooler bolts (2) and tighten to 10 N.m (89 lb in).
    CAUTION: Refer to Fastener Caution .
scientia non olet · About LEMON Manuals