LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Engine Oil Cooler Housing Installation

Engine Oil Cooler Housing Installation

WARNING: This page is about a different variant/trim than selected.
  1. Engine Oil Cooler Seal (4) - Install
    Fig 1: Engine Oil Cooler Mounting Plate Bolt
    GM4224556Courtesy of GENERAL MOTORS COMPANY
    NOTE: Install NEW seals.
  2. Engine Oil Cooler Housing Seal (3) - Install
  3. Engine Oil Cooler Housing (1) - Install
  4. Engine Oil Cooler Mounting Plate Bolt (2) - Install and tighten [4x] 25 N.m (18 lb ft)
    CAUTION: Fastener Caution
scientia non olet · About LEMON Manuals