LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Cylinder Head Removal

Cylinder Head Removal

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the cylinder head bolts (1) in the sequence as shown.
    Fig 1: Cylinder Head Bolt Loosening Sequence
    GM3216211Courtesy of GENERAL MOTORS COMPANY
  2. Remove and DISCARD the 10 cylinder head bolts (1).
    Fig 2: Cylinder Head Bolts
    GM3216212Courtesy of GENERAL MOTORS COMPANY
  3. Remove the cylinder head (2).
  4. Remove and DISCARD the cylinder head gasket (3).