LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal Housing Removal

Crankshaft Rear Oil Seal Housing Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the 6 short crankshaft rear oil seal housing bolts (1).
    Fig 1: Crankshaft Rear Oil Seal Housing Bolts
    GM3011802Courtesy of GENERAL MOTORS COMPANY
  2. Remove the 4 long crankshaft rear oil seal housing bolts (2).
  3. Loosen the crankshaft rear oil seal housing (1) at the intended positions (2) with a suitable tool.
    Fig 2: Crankshaft Rear Oil Seal Housing Loosening Points
    GM3011804Courtesy of GENERAL MOTORS COMPANY
  4. Remove the crankshaft rear oil seal housing (1) in conjunction with the crankshaft rear oil seal.
scientia non olet · About LEMON Manuals