LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Crankshaft Front Oil Seal Installation

Crankshaft Front Oil Seal Installation

WARNING: This page is about a different variant/trim than selected.

Special Tools 

EN-51152  Crankshaft Front Oil Seal Installer

For equivalent regional tools, refer to Special Tools .

  1. Install the NEW crankshaft front oil seal (1) to the EN-51152  installer (2).
    Fig 1: Crankshaft Front Oil Seal Installer
    GM2968031Courtesy of GENERAL MOTORS COMPANY
  2. Using the EN-51152  installer (1) to install the crankshaft front oil seal to the engine front cover.
    Fig 2: Installing Crankshaft Front Oil Seal To Engine Front Cover
    GM2968030Courtesy of GENERAL MOTORS COMPANY
  3. Install the crankshaft balancer absorber bolt (2) and tighten.
  4. Remove the bolt (2) and EN-51152  installer (1).
  5. Ensure that the crankshaft front oil seal (1) flushes with the engine front cover (2).
    Fig 3: Crankshaft Front Oil Seal And Cover
    GM3011801Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals