LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - Off Vehicle >> Catalytic Converter Heat Shield Installation

Catalytic Converter Heat Shield Installation

WARNING: This page is about a different variant/trim than selected.
  1. Catalytic Converter Heat Shield (1) - Install
    Fig 1: Catalytic Converter Heat Shield
    GM4224545Courtesy of GENERAL MOTORS COMPANY
  2. Catalytic Converter Heat Shield Bolt (2, 3) - Install and tighten [4x] 9 N.m (80 lb in)
    CAUTION: Fastener Caution
  3. Catalytic Converter Heat Shield Nut (4) - Install and tighten 9 N.m (80 lb in)
scientia non olet · About LEMON Manuals