LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Measurement Procedure

Measurement Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the EN-6106  adapter (2).
    Fig 1: Oil Pressure Gauge Installation
    GM3216206Courtesy of GENERAL MOTORS COMPANY
  2. Install the EN-498-B  gauge (2).
  3. Start the engine.
  4. Check oil pressure.
  5. At idling speed, the oil pressure must be greater than 150 kPa (21.76 psi) and the oil temperature must be 85°C (185°F) or more.