LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Turn off the engine.
    Fig 1: Oil Pressure Gauge Installation
    GM3216206Courtesy of GENERAL MOTORS COMPANY
  2. Remove the EN-498-B  gauge (2).
  3. Remove the EN-6106  adapter (1).
  4. Install the engine oil pressure sensor. Refer to Engine Oil Pressure Sensor Replacement .
  5. Check the engine oil level.
scientia non olet · About LEMON Manuals