LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls And Fuel - 1.8L (LKN) - Repair Instructions) >> Repair Instructions >> Brake Pedal Position Sensor Learn >> Calibration Procedure

Calibration Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Apply the parking brake.
  2. Vehicle in Service Mode, transmission in Park.
  3. Clear all DTCs.
  4. Perform the scan tool Body Control Module Brake Pedal Position Sensor Learn procedure and follow the on-screen instructions.
  5. Verify the scan tool Brake Pedal Position Sensor Learned Released Position parameter displays Yes when Learn is completed.
    • If Yes is not displayed 

      Repeat the procedure.

    • If Yes is displayed 
  6. Perform the scan tool Engine Control Module Brake Pedal Position Sensor Learn procedure and follow the on-screen instructions.
  7. Verify the scan tool Brake Pedal Position Fully Released Position Learned parameter displays Yes when Learn is completed.
    • If Yes is not displayed 

      Repeat the procedure.

    • If Yes is displayed 
  8. All OK.
scientia non olet · About LEMON Manuals