Drive Motor Generator Battery Bracket Replacement (Drive Motor Battery Radiator Surge Tank)
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Reposition the drive motor battery radiator surge tank without draining coolant or disconnecting hoses. Refer to Drive Motor Battery Radiator Surge Tank Replacement |
|
| 1 | Drive Motor Generator Battery Bracket Bolt [2x]
CAUTION:
Refer to Fastener Caution
. Tighten 9 N.m (80 lb in) |
| 2 | Drive Motor Generator Battery Bracket Nut Tighten 9 N.m (80 lb in) |
| 3 | Drive Motor Generator Battery Bracket Preliminary Procedure Unclip electrical harness from the coolant temperature system control module bracket. |