Component Testing
WARNING: This page is about a different variant/trim than selected.
- Vehicle OFF, disconnect the harness connector at the B202 Hybrid/EV Electronics Coolant Temperature Sensor.
- Test for 2 - 2.5 kΩ at approximately 21.11°C (70°F) between the signal terminal and the low reference terminal. Refer to Temperature Versus Resistance for Hybrid/EV Electronics Coolant Temperature Sensor.
- If not within the specified range
Replace the B202 Hybrid/EV Electronics Coolant Temperature Sensor.
- If within the specified range
- If not within the specified range
- All OK.