Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P2227 Condition 1

BARO & Calculated BARO=Not within 15 kPa (2.2 PSI) of each other. For greater than 4 s

Condition 2

BARO & Calculated BARO=Not within 20 kPa (3.0 PSI) of each other. For greater than 4 s

Condition 3

BARO=Less than 50 kPa (7.3 PSI) or Greater than 115 kPa (16.7 PSI). For greater than 0.5 s

P2228

BARO=Less than 0.7 V - For greater than 4 s

P2229

BARO=Greater than 4.5 V - For greater than 4 s

P2230

BARO=Signal noisy or erratic - For greater than 4 s