Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0601, P0602, P0630
- The vehicle is ON.
- These DTCs run continuously when the above condition is met.
P0603, P062F
- The vehicle is ON.
- These DTCs run once per ignition cycle.
P0604
- The vehicle is ON for greater than 30 s.
- DTC P0604 runs continuously when the above condition is met.
P0606, P062B
- The system voltage is greater than 11 V.
- DTC P0606 runs continuously when the above condition is met.
P16F3
- The engine is running.
- DTCs P0101, P0102, P0103, P0106, P0107 or P0108 are not set.
- DTC P16F3 runs continuously when the above conditions are met.
P262B
- Vehicle OFF.
- The ECM is not powered down.
- DTC P262B runs continuously when the above conditions are met.