Circuit/System Testing
WARNING: This page is about a different variant/trim than selected.
- Verify that the fuel pressure is not too low or too high. Refer to Fuel System Diagnosis .
- If a condition is found
Repair or replace components as necessary
- If a condition is not found
- If a condition is found
- Verify that the fuel is not contaminated. Refer to Alcohol/Contaminants-in-Fuel Diagnosis .
- If the fuel is contaminated
Clean the fuel system. Refer to Fuel System Cleaning .
- If the fuel is not contaminated
- If the fuel is contaminated
- Replace the appropriate fuel injectors as indicated by high misfire counts.