Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P043E, P043F, P06E4, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P111E, P0461, P0462, P0463, P1462, P1463, P145C, P145D, P145F, P0451, P0452, P0453, P0502, P0503, P0722, P0723, P2066, P2067, P2068, P2227, P2228, P2229, P2230, P2400, P2401, P2402, P2418, P2419, P2420, P2450, P24BA, P24BB, P24B9. P2537, P262B, U0140, U182D, U0073, U0074, is not set.
The barometric pressure (BARO) is between 70 - 110 kPa (10 - 16 PSI).
The fuel level is between 10 - 90%.
The ECT is less than 40°C (104°F).
The IAT is between 4 - 45°C (39 - 113°F).
The system voltage is greater than 10 V.
Vehicle speed less than 4.8 km/h (3 MPH).
No refueling event detected prior to running this test.
There are three possible time windows for this test to run. Up to that point and through this time period the propulsion system must not be active. These time windows are: 5.0, 7.0 or 9.5 hours.