Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTCs P0010, P0011, P0013, P0014, P0030, P0031, P0032, P0036, P0053, P0097, P0098, P0101, P0102, P0103, P0106, P0107, P0108, P0117, P0118, P0121, P0122, P0123, P0128, P0131, P0132, P0133, P0135, P0137, P0138, P0141, P0222, P0223, P0300, P0335, P0336, P0341, P0443, P0458, P0459, P0506, P0507, P2088, P2089, P2090, P2091, P2096, P2097, P2176, P2270, P2271 have run and passed.
- Engine speed is greater than 1, 100 RPM for a minimum of 35 s.
- Intake air temperature (IAT) is between -20 to +250°C (-4 to +482°F).
- Engine coolant temperature (ECT) is between 50 - 130°C (122 - 266°F).
- Barometric pressure (BARO) is greater than 70 kPa (10 PSI).
- Calculated catalyst temperature is between 575 - 850°C (1, 067 - 1, 562°F) and stable.
- Post HO2S has exceeded the dew point for greater than 60 s.