Conditions for Running the DTC

P0335 Condition 1

• DTCs P0101, P0102 and P0103 are not set.

  OR

• The starter is engaged and the engine control module detects camshaft position sensor pulses.

  AND

• The airflow into the engine is greater than 1.5 g/s.

Condition 2

• The engine is running.
• The starter is not engaged.

Condition 3

• DTCs P0365 or P0366 are not set.
• The engine is running or the starter is engaged.

P0336 Condition 1

• DTCs P0335 is not set.
• The airflow into the engine is greater than 1.5 g/s.
• Engine speed is greater than 450 RPM.

Condition 2

• The engine is running.
• The starter is not engaged.

Condition 3

• DTCs P0101, P0102 and P0103 are not set.
• The airflow into the engine is greater than 1.5 g/s.

  OR

• The starter is engaged and the engine control module detects camshaft position sensor pulses.

Condition 4

• DTCs P0365 or P0366 are not set.
• The engine is running or the starter is engaged.

The DTCs run continuously once the above conditions are met.