LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Engine Controls And Fuel - 1.8L (LKN) - DTC P0010 To P0459) >> Diagnostic Information and Procedures >> DTC P00F4-P00F6: Intake Air Humidity Sensor Circuit >> Component Testing >> Multifunction Intake Air Sensor

Multifunction Intake Air Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Test the Intake Air Humidity Sensor by varying the air humidity in the intake duct near the sensor, while observing the scan tool Intake Air Humidity Sensor parameter. The parameter should change and be within 5 - 95%.
    • If not within the specified range 

      Replace the B75C Multifunction Intake Air Sensor.

    • If within the specified range 
  2. All OK.