Park Pawl and Front Differential Carrier Baffle Installation
WARNING: This page is about a different variant/trim than selected.
Park Pawl and Front Differential Carrier Baffle Installation
| Callout | Component Name |
|---|---|
| 1 | Park Pawl |
| 2 | Park Pawl Spring |
| 3 | Park Pawl Shaft
NOTE:
Check to ensure that the park pawl operates freely and is not binding.
|
| 4 | Drive Link Lubricant Fluid Seal
NOTE:
Install a NEW seal. Do NOT reuse the old seal.
|
| 5 | Drive Link Lubricant Scoop |
| 6 | Front Differential Carrier Baffle |
| 7 | Front Differential Carrier Baffle Bolt [2x]
CAUTION:
Refer to Fastener Caution
. Tighten 12 N.m (106 lb in) |