6-7-8-9 Clutch Plates, Dam and Piston Disassemble
WARNING: This page is about a different variant/trim than selected.
6-7-8-9 Clutch Plates, Dam and Piston Disassemble
| Callout | Component Name |
|---|---|
| 1 | 4-5-6 Clutch Dam Retaining Ring
NOTE:
Remove and DISCARD the retainer.
|
| 2 | 6-7-8-9 Clutch Piston Dam Special Tools DT-47951 - 2 Spring Compressor Equivalent regional tools: Special Tools |
| 3 | 6-7-8-9 Clutch Piston Retainer Spring |
| 4 | 6-7-8-9 Clutch Piston |
| 5 | 4-5-6 Clutch Piston Outer Seal
NOTE:
Remove and DISCARD the seal.
|
| 6 | 4-5-6 Clutch Piston Dam Seal
NOTE:
Remove and DISCARD the seal.
|
| 7 | 4-5-6 Clutch Piston Inner Seal
NOTE:
Remove and DISCARD the seal.
|