1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (2 of 2) Disassemble
WARNING: This page is about a different variant/trim than selected.
1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (2 of 2) Disassemble
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4-5-6 Clutch Spring Retaining Ring |
| 2 | 1-2-3-4-5-6 Clutch Piston Return Spring |
| 3 | 1-2-3-4-5-6 Clutch Piston
NOTE:
Blow air in port to help release the piston from the housing.
|
| 4 | 1-2-3-4-5-6 Clutch Piston Inner Seal
NOTE:
Remove and DISCARD the seal.
|
| 5 | 1-2-3-4-5-6 Clutch Piston Seal
NOTE:
Remove and DISCARD the seal.
|