1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (1 of 2) Assemble
WARNING: This page is about a different variant/trim than selected.
1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (1 of 2) Assemble
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4-5-6 Clutch Piston Seal
NOTE:
Install a NEW seal. Do NOT reuse the old seal.
|
| 2 | 1-2-3-4-5-6 Clutch Piston Inner Seal
NOTE:
Install a NEW seal. Do NOT reuse the old seal.
|
| 3 | 1-2-3-4-5-6 Clutch Piston |
| 4 | 1-2-3-4-5-6 Clutch Piston Return Spring
NOTE:
Ensure spring is centered. Special Tools DT-47797 Spring Installer Equivalent regional tools:Special Tools |
| 5 | 1-2-3-4-5-6 Clutch Spring Retaining Ring |