LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Automatic Transmission - 9T50 (M3E) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the left front wheel house liner. Refer to Front Wheelhouse Liner Replacement .
  2. Remove the input speed sensor bolt (1).
    Fig 1: Input Speed Sensor Bolt
    GM4487717Courtesy of GENERAL MOTORS COMPANY
  3. Remove the input speed sensor (2).
  4. Remove the input speed sensor seal (3).
scientia non olet · About LEMON Manuals