Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Install the PCV hose assembly and PCV valves (3).
- Install the NEW PCV valve fasteners (1) using EN-50956
tamper proof drive bit and tighten to 10 N.m (89 lb in).CAUTION: Refer to Fastener Caution .
- Install the PCV hose fastener (2) and tighten to 12 N.m (106 lb in).
- Positive Crankcase Ventilation Tube @ Air Cleaner Outlet Duct - Connect Air Cleaner Outlet Duct Replacement
- Intake Manifold Cover Replacement - Install