LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Intake Manifold Cover - Remove Intake Manifold Cover Replacement 
  2. Air Cleaner Assembly - Remove Air Cleaner Assembly Replacement
  3. Engine Support Fixture - Install Engine Support Fixture 
  4. Engine Mount Brace Nut (1) - Remove
    Fig 1: Engine Mount Brace Nut
    GM4233006Courtesy of GENERAL MOTORS COMPANY
  5. Engine Mount Brace Bolt (2) - Remove
  6. Engine Mount Brace (3) - Remove
  7. Engine Mount Bolt (1) - Remove and DISCARD [2x]
    Fig 2: Engine Mount Bolt
    GM4238123Courtesy of GENERAL MOTORS COMPANY
  8. Engine Mount Bolt (1) - Remove and DISCARD [2x]
    Fig 3: Engine Mount To Engine Mount Bracket Bolts
    GM4238142Courtesy of GENERAL MOTORS COMPANY
  9. Engine Mount (2) - Remove