Conditions for Setting the DTCs
WARNING: This page is about a different variant/trim than selected.
P0325
The ECM detects knock sensor 1 signal circuit is open.
P0327
The ECM detects knock sensor 1 signal circuit is shorted to ground.
P0328
The ECM detects knock sensor 1 signal circuit is shorted to voltage.
P0330
The ECM detects knock sensor 2 signal circuit is open.
P0332
The ECM detects knock sensor 2 signal circuit is shorted to ground.
P0333
The ECM detects knock sensor 2 signal circuit is shorted to voltage.