Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
Intake Air Humidity Sensor
| Circuit | Short to Ground | Open or High Resistance | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine Running Parameter Normal Range: Varies with ambient humidity and temperature; and engine bay conditions |
|||
| Ignition 1 | 0% | 0% | - |
| Signal | 100% | 0% | 0%* |
| Ground | - | 0% | - |
| *Internal ECM or sensor damage may occur if the circuit is shorted to B+ | |||
IAT Sensor 2
| Circuit | Short to Ground | Open or High Resistance | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine Running Parameter Normal Range: Varies with ambient temperature |
|||
| Ignition 1 | -40°C (-40°F) 10 Hz |
-40°C (-40°F) 10 Hz |
- |
| Signal | -40°C (-40°F) 10 Hz |
-40°C (-40°F) 10 Hz |
-40°C (-40°F) 10 Hz* |
| Ground | - | -40°C (-40°F) 10 Hz |
- |
| *Internal ECM or sensor damage may occur if the circuit is shorted to B+ | |||