Neutral High
WARNING: This page is about a different variant/trim than selected.
- Solenoids D, F, G and PISA are on. Solenoid G shuttles the mode enable valve to provide line pressure to transmission range control valves. The PISA is held on to prevent an unintentional parking pawl engagement if hydraulic pressure at the park servo is lost. Solenoid F prevents line pressure from entering the 1 Rev/6789C hydraulic circuit.
- Solenoid D shuttles transmission range control valve 1 which allows Feed 0 fluid to enter the Reverse hydraulic circuit which applies the park servo, disengaging the parking pawl. The clutch selector valve is shuttled to prevent reverse fluid from applying any clutches.