Conditions for Running the DTC

• The vehicle is ON or the module is awake.
• Motor temperature is greater than -20°C (-4°F). If motor temperature is less than -20°C (-4°F) at vehicle ON, the drive motor must operate at greater than 20 N.m (14.75 lb ft) for a cumulative time of 1.5 minutes before the DTC will run.

P1E34

• The vehicle is ON or the module is awake for more than 10 minutes.
• The drive motor(s) have been operating.

P1E35 

The vehicle is ON or the module is awake.

P1E36

• The inverter temperature is greater than -20°C (-4°F).
• P0AF0 and P0AEF are not present.