Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Vehicle ON.
- Verify DTC P1E2A, P1E2B, P1E2C, P1E2D, P1E2E, P1E2F is not set.
- If any of the DTCs are set
- Program the T6 Power Inverter Module.
- Verify the DTC does not set.
- If the DTC sets, replace the T6 Power Inverter Module.
- If the DTC does not set.
- All OK
- If none of the DTCs are set
- All OK