Diagnostic Aids

WARNING: This page is about a different variant/trim than selected.

If the vehicle is powered off while driving, DTC P1B0F or P1B10 may set.
The drive motor position sensor circuits operate at very low current. These circuits are susceptible to moisture intrusion, corrosion and terminal damage. Extreme care must be taken when probing terminals and manipulating harnesses. Poor terminal connections can result in intermittent operation.
Intermittent appearance of DTC P0A3F, P0A40, P0C52, P0C53, P0C5C, P0C5D or P1B03 for drive motor 1 or DTC P0A45, P0A46, P0C57, P0C58, P0C61, P0C62 or P1B04 for drive motor 2 suggests intermittent position sensor circuit or connector problems.