Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Vehicle ON.
- Verify DTC P0AEE, P0AEF, P0AF0, P0AF3, P0AF4, P0AF5, P0BD2, P0BD3, P0BD4, P0BD7, P0BD8, P0BD9, P0BDC, P0BDD, P0BDE, P0BE1, P0BE2 or P0BE3 is not set.
- If any of the DTCs are set
- Program the T6 Power Inverter Module.
- Verify the DTC does not set.
- If the DTC sets, replace the T6 Power Inverter Module.
- If the DTC does not set.
- All OK.
- If none of the DTCs are set
- All OK.