Fastener Specifications
WARNING: This page is about a different variant/trim than selected.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal.
|
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Master Cylinder Hose Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Brake Pipe Fitting - Left Front, Left Rear, Right Front, Right Rear | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve Bracket Bolt | 9 N.m (80 lb in) |
| Brake Pressure Modulator Valve Bracket Nut | 9 N.m (80 lb in) |
| Brake Pressure Modulator Valve Nut | 9 N.m (80 lb in) |
| Brake Pressure Modulator Valve Primary Pipe Fitting | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve Secondary Pipe Fitting | 32 N.m (24 lb ft) |
| Electronic Brake Control Module Bolt | 3 N.m (27 lb in) |
| Wheel Speed Sensor Bolt | 9 N.m (80 lb in) |