LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Antilock Brake System - Hybrid) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Brake Pressure Modulator Valve Bracket (1) - Install
    Fig 1: Brake Pressure Modulator Valve Bracket
    GM4318412Courtesy of GENERAL MOTORS COMPANY
    NOTE: A small amount of denatured alcohol may be used on the insulator as a lubricant to ease installation.
  2. Brake Pressure Modulator Valve Nut (1) - Install and tighten 9 N.m (80 lb in)
    Fig 2: Brake Pressure Modulator Valve Nut
    GM4318411Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Fastener Caution
  3. Electronic Brake Control Module with Brake Pressure Modulator Valve - Install Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement 
scientia non olet · About LEMON Manuals