Traction Control/Stability Control Indicator

The instrument cluster turns the traction control/stability control indicator ON when the following occurs:

• The electronic brake control module (EBCM) detects an ABS/TC/VSC-disabling malfunction and sends a serial data message to the instrument panel cluster requesting illumination.
• The instrument panel cluster performs the bulb check.
• The instrument panel cluster detects a loss of serial data communication with the EBCM.
• A DTC is set during the previous ignition cycle which requires a United Nations Economic Commission for Europe regulation number 13 (ECE 13) response at the beginning of the current ignition cycle. The EBCM sends a serial data message to the instrument panel cluster requesting illumination.
• The EBCM is actively controlling propulsive torque or brake torque due to a loss of traction or vehicle stability event.
• The TC/VSC system has been manually disabled by the vehicle operator.