ABS Indicator
WARNING: This page is about a different variant/trim than selected.
The instrument panel cluster illuminates the ABS indicator when the following occurs:
- The electronic brake control module (EBCM) detects an ABS-disabling malfunction and sends a serial data message to the instrument panel cluster requesting illumination.
- The instrument panel cluster performs the bulb check.
- The instrument panel cluster detects a loss of serial data communication with the EBCM.
- A DTC is set during the previous ignition cycle which requires a United Nations Economic Commission for Europe regulation number 13 (ECE 13) response at the beginning of the current ignition cycle. The EBCM sends a serial data message to the instrument panel cluster requesting illumination.