Installation Procedure

Turbocharger Wastegate Regulator Solenoid Valve (2) - Install

Fig 1: Turbocharger Wastegate Regulator Solenoid Valve And Bolt
Courtesy of GENERAL MOTORS COMPANY
Turbocharger Wastegate Regulator Solenoid Valve Bolt (1) - Install and tighten 8 N.m (71 lb in)
CAUTION: Refer to Fastener Caution .
Turbocharger Wastegate Regulator Solenoid Valve Hose (2) @ Turbocharger Wastegate Regulator Solenoid Valve - Install [3x]

Fig 2: Turbocharger Wastegate Regulator Solenoid Valve Hoses And Clamps
Courtesy of GENERAL MOTORS COMPANY
Turbocharger Wastegate Regulator Solenoid Valve Hose Clamp (1) @ Turbocharger Wastegate Regulator Solenoid Valve - Engage [3x]
Electrical Connector (1) @ Turbocharger Wastegate Regulator Solenoid Valve - Connect

Fig 3: Electrical Connector
Courtesy of GENERAL MOTORS COMPANY
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9)