Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Verify the scan tool parameter:Ambient Air Temperature= = -40 to 88°C (-40 to 190°F) and changes
- If not between = -40 to 88°C (-40 to 190°F) or does not change
Refer to: Circuit/System Testing
- If between = -40 to 88°C (-40 to 190°F) and changes
- If not between = -40 to 88°C (-40 to 190°F) or does not change
- Perform the special tool function:Ambient Air Temperature Instant Update
- Verify the following parameter is within 5°C (8°F) of the actual ambient air temperature:Ambient Air Temperature
- If not within 5°C (8°F) of the actual ambient air temperature
Refer to: Circuit/System Testing
- If within 5°C (8°F) of the actual ambient air temperature
- If not within 5°C (8°F) of the actual ambient air temperature
- All OK.