S38 Ignition Mode Switch
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | - | - | - | Not Occupied | - | - |
| 2 | 0.13 0.13 |
BU/WH VT |
5720 5720 |
Ignition Mode Switch Accessory LED Signal Ignition Mode Switch Accessory LED Signal |
I I |
TM+J69 TM-J69 |
| 3 | 0.13 | GN/GY | 3558 | Passive Start Switch Signal 2 | I | - |
| 4 | 0.5 | BK | 2250 | Ground | I | - |
| 5 | 0.13 | BU/WH | 5719 | Ignition Mode Switch Start LED Signal | I | - |
| 6 | 0.13 | BU/OG | 5723 | Ignition Mode Switch Mode Voltage | I | - |
| 7 | 0.13 | BK/GY | 3559 | Passive Start Switch 2 Low Reference | I | - |
| 8 | 0.5 | YE | 6817 | LED Backlight Dimming Control | I | - |