Removal Procedure

Clearance Adjustment 

Courtesy of GENERAL MOTORS COMPANY

1. Apply masking tape to the door edges and surrounding body components.
2. Loosen the upper roller, lower roller and center roller bracket bolts.
3. Adjust the clearance of the sliding side door according to the specifications.
   • Sliding Rear Side Door to Body Side Upper - Clearance

     (A) 5.4 mm ± 1.0 mm (0.21 in ± 0.04 in)

   • Front Door to Sliding Rear Side Door - Clearance

     (B) 7.0 mm ± 1.0 mm (0.28 in ± 0.04 in)

   • Sliding Rear Side Door to Body Side Lower - Clearance

     (C) 5.5 mm ± 1.6 mm (0.22 in ± 0.06 in)

   • Sliding Rear Side Door to Body Side Rear - Clearance

     (D) 5.4 mm ± 1.0 mm (0.21 in ± 0.04 in)

Surface Height Adjustment 

Courtesy of GENERAL MOTORS COMPANY

1. Apply masking tape to the door edges and surrounding body components.
2. Loosen the upper roller, lower roller and center roller bracket bolts.
3. Adjust the surface height of the sliding side door according to the specifications.
   • Sliding Rear Side Door to Body Side Upper - Surface Height

     (A) 0.0 mm ± 1.0 mm (0.00 in ± 0.04 in)

   • Front Door to Sliding Rear Side Door - Surface Height

     (B) 0.0 mm ± 1.0 mm (0.00 in ± 0.04 in)

   • Sliding Rear Side Door to Body Side Lower - Surface Height

     (C) 0.0 mm ± 1.0 mm (0.00 in ± 0.04 in)

   • Sliding Rear Side Door to Body Side Rear - Surface Height

     (D) 0.0 mm +0.5,-1.0 mm (0.00 in +0.02,-0.04 in)