Removal Procedure
Clearance Adjustment
- Apply masking tape to the door edges and surrounding body components.
- Loosen the body side upper and lower hinge bolts.
- Adjust the clearance of the rear door according to the specifications.
- Rear Door to Body Side - Clearance
(A) 5.0 mm ± 1.4 mm (0.20 in ± 0.06 in)
- Rear Door to Tail Lamp - Clearance
(B) 5.6 mm ± 2.0 mm (0.22 in ± 0.08 in)
- Rear Door (LH) to Rear Door (RH) - Clearance
(C) 5.9 mm + 1.0,-0.3 mm (0.23 in + 0.04,-0.01 in)
- Rear Door to Body Side - Clearance
Surface Height Adjustment
- Apply masking tape to the door edges and surrounding body components.
- Loosen the door side upper and lower hinge bolts.
- Adjust the clearance of the rear door according to the specifications.
- Rear Door to Body Side - Surface Height
(A) 0.0 mm ± 1.0 mm (0.00 in ± 0.04 in)
- Rear Door to Tail Lamp - Surface Height
(B) 7.3 mm ± 1.5 mm (0.29 in ± 0.06 in)
- Rear Door (LH) to Rear Door (RH) - Surface Height
(C) 0.0 mm ± 1.0 mm (0.00 in ± 0.04 in)
- Rear Door to Body Side - Surface Height