Circuit/System Verification
- Ignition ON.
- Verify the scan tool Ambient Air Temperature parameter is between -40°C (-40°F) and +88°C (+190°F) and changes with air temperature changes.
- If not between -40°C (-40°F) to + 91°C (+195°F) or does not change with air temperature changes
Refer to Circuit/System Testing in the following below.
- Go to next step: If between -40°C (-40°F) to + 91°C (+195°F) and changes with air temperature changes
- If not between -40°C (-40°F) to + 91°C (+195°F) or does not change with air temperature changes
- All OK.