Hood Primary and Secondary Latch Replacement

Fig 1: Hood Primary and Secondary Latch

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Compartment Front Sight Shield Replacement
1	Hood Primary and Secondary Latch Bolt (Qty: 2) CAUTION: Fastener Caution Tighten 9 N.m (80 lb in)
2	Hood Primary and Secondary Latch Procedure Disconnect the release cable from the hood primary latch. Unclip and disconnect the electrical connector.

Callout

Component Name

Hood Primary and Secondary Latch Bolt (Qty: 2)

CAUTION:

Tighten
9 N.m (80 lb in)

Hood Primary and Secondary Latch

Procedure