Circuit/System Verification
- Vehicle in Service Mode.
- Verify all indicators illuminate when performing the Instrument Cluster All Indicators test with the scan tool.
- If all indicators do no illuminate
Replace the P16 Instrument Cluster.
- If all indicators illuminate
- If all indicators do no illuminate
- Verify Instrument Cluster dimming changes from 0 - 100% when performing the Instrument Cluster Dimming test with the scan tool.
- If Instrument Cluster dimming does not change properly
Replace the P16 Instrument Cluster.
- If Instrument Cluster dimming changes properly
- If Instrument Cluster dimming does not change properly
- All OK.