LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Volt LT >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary and Secondary Latch Replacement

Hood Primary and Secondary Latch Replacement

Fig 1: Hood Primary and Secondary Latch
GM4141591Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Hood Primary and Secondary Latch Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Hood Primary and Secondary Latch

Procedure

  1. Disconnect and unclip the electrical connector from the core support.
  2. Disconnect the release cable from the hood primary latch.
  3. Disconnect the hood secondary latch release cable from the hood primary and secondary latch.
  4. Align the hood primary and secondary latch if necessary.
scientia non olet · About LEMON Manuals