Liftgate Hinge Replacement

Fig 1: Liftgate Hinge

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Liftgate Replacement . Lower the rear of the headliner to access the bolts. Headlining Trim Panel Replacement Mark the position of the hinges with a grease pencil.
1	Liftgate Hinge Bolt- Bodyside (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
2	Liftgate Hinge (Qty: 2) Procedure Liftgate Adjustment

Callout

Component Name

Preliminary Procedure

Liftgate Replacement .
Lower the rear of the headliner to access the bolts. Headlining Trim Panel Replacement
Mark the position of the hinges with a grease pencil.

Liftgate Hinge Bolt- Bodyside (Qty: 4)

CAUTION:

Tighten
25 N.m (18 lb ft)

Liftgate Hinge (Qty: 2)
Procedure
Liftgate Adjustment