Hood Replacement

Fig 1: Hood

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Windshield Washer Nozzle Hose Replacement NOTE: It is only necessary the reposition the hose from the nozzle and hood.
1	Hood Hinge Reinforcement Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Hood Procedure With the aid of an assistant, remove the hood. Transfer components as necessary. Adjust Hood -Hood Adjustment

Callout

Component Name

WARNING:

When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure Windshield Washer Nozzle Hose Replacement

NOTE:

It is only necessary the reposition the hose from the nozzle and hood.

Hood Hinge Reinforcement Nut (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
22 N.m (16 lb ft)

Hood

Procedure

With the aid of an assistant, remove the hood.
Transfer components as necessary.
Adjust Hood -Hood Adjustment