Battery Negative Cable Disconnection and Connection (with KL9)
| Callout | Component Name |
|---|---|
| 1 |
CAUTION:
Battery Negative Post Clamp NutTighten 4.5 N.m (40 lb in)Refer to Fastener Caution . |
| 2 | Battery Negative Cable Procedure
NOTE:
Inform the customer that the Stop/Start feature will not be available until the vehicle is allowed to sit for at least 3 hours undisturbed. If diagnosing a stop/start complaint, conduct the battery sensor module learn procedure to verify the repair. Perform a re-learn procedure on the battery sensor module, refer to Battery Sensor Module Learn |